Used Equipment

Vision 98

Published Friday August 21st, 2015 | By

Vision is a data recorder/transient recorder with up to 16 channels. Depending on the sampling rate and the number of active channels a huge volume of data can be acquired up to 20 kHz with one recording. A simple user interface offers a fast set up time: Starting a quick recording of the signals and later on the evaluation and documentation. Comprehensive trigger modes make also single shot measurements of transient signals possible and an automated documentation.
Features:
	Verstärker Analog Inputs 8 or 16 Sampling rate 1 S/s bis 100 kS/s je Channel Bandwidth 20 kHz A/D-Resolution 16 Bit Range 50 mV bis 1000 V Isolation 1000 V rms to chassis/ground Anti-Aliasing-Filter, Input connector 4 mm safety-banana type Coupling AC, DC,GND, DC-RMS,AC-RMS Overvoltage protection 2 kV For more specs please click here Gain accuracy 0,05% fullscale Zero supression – 100% fullscale Noise 0.15% (50 mV, 100 mV) Noise 0.05% (>100 mV) nonlinearity 0.02% MSE 0.10% Inputimpedance 1 MOhm, 40 pF nominell Max. Inputvoltage 500 V AC, DC pp, IEC Cat I System Processor Intel Celeron 466 MHz or better Display 10.4″ TFT Color, 640 x 480 System HD internal IDE 20 GByte or more Recording HD: SCSI HD 9 GB or more Discette drive Intern, 3.5″ 1.44 MByte Standard; Sound Blaster kompatibel, internal speaker Interfaces Fast Ethernet, IrDA, Centronics,Tastatur, Mouse, RS232 Acquisition, Display and Plotter Display modes: Oscilloscope- Mode, X/Y (only Offline) Levelmeter Zoom X and Y in Steps of x2 Acquisition mode: continuous or triggered Pretrigger free selectable up to HD volume Multi-Shot 1 – 10.000 Single- events with Pre- und Posttrigger Digitalinputs: Status, frequency, counter, rpm Externer I/O clock,Trigger, Start, Stop Physicals Dimensions 42 x 32 x 15 cm (L x B x H) Weight: 10 kg Voltage 120/220 V AC, 50/60 Hz 150 – 175 W
Price: On request

Gould TA2000

Published Friday August 21st, 2015 | By

The TA2000 Recorder is a 8 Channel paper recorder and contains a thermal printing head with 8 dots/mm. The simultaneous plot of signals, grid and text enables complete protocols.
Features:
1…8 Channels with 14-pin Cannon Connector Range -5 to +5 V, inverted Scaling: 1, 2 oder 4 div / V; individually selectable for each channel Zeroposition in steps of 1 div; for each channel separately controllable Frequency Rangeup to 5 kHz Peak detect: 150 µs or longer Vertical resolution: 200 dots/inch / (8 points/mm) Overlapping traces Time and date Paperspeed: 1 mm / minute to 200 mm / s in 16 steps Compatibel with preamps Gould 4600 und 5600 Adaptors for other amps on request
Price: On request

Gould TA2000 Bridge Amplifier 13-G4615-30

Published Friday August 21st, 2015 | By

The picture shows a Gould preamplifier system , consisting of a 19“ top desk case with an included power supply and 8 DC Bridge Amplifier type 13-G4615-30. Ideal compatible with the Gould TA2000 recorder . Delivered with the “3000 recorder interface”
Features:
Range: 25….10000 µinches / inch Calibration and adjustments on frontpanel Bridge extension selectable Output lowpass filter selectable Adjustable shunt calibration Calibrated zero supression This position is offered only TOGETHER with the TA 2000 recorder, not as a single device
Price: On request

Navigation: